Avocent CCM - Manual (Page 116)

102 CCM Installer/User Guide
NFSPortOpenFailGave
Up
NFS is enabled on the port, but repeated attempts to open the history file on the
NFS server have failed. No additional file open retries will be performed.
Variables: CCM appliance port number, port error status (see NFS Port Status
Values on page 111) plus primary and secondary NFS error codes (see NFS Error
Codes on page 105)
NFSPortOpenFail
Retrying
NFS is enabled on the port, but the first attempt to open the history file on the NFS
server has failed. Additional file open retries are being performed.
Variables: CCM appliance port number, port error status (see NFS Port Status
Values on page 111) plus primary and secondary NFS error codes (see NFS Error
Codes and Port Status on page 105)
NFSPortOverrunError
NFS is enabled on the port and has successfully opened the history file on the NFS
server; however, an overrun error occurred when writing to that file.
Variables: CCM appliance port number, port error status (see NFS Port Status
Values on page 111) plus primary and secondary NFS error codes (see NFS Error
Codes and Port Status on page 105)
NFSPortWriteError
NFS is enabled on the port and has successfully opened the history file on the NFS
server; however, an error occurred when writing to that file.
Variables: CCM appliance port number, port error status (see NFS Port Status
Values on page 111) plus primary and secondary NFS error codes (see NFS Error
Codes and Port Status on page 105)
NFSUnmountedOK NFS is disabled and the unmount operation has completed successfully.
PortAlert
The CCM appliance detected a port alert string on a serial port.
Variables: server name, port number and port alert string
PortPowerOffDetect
The CCM appliance detected that a port’s power on/off control signal is in the state
indicating power is off. This trap is sent upon initialization if the condition is detected.
Subsequent traps are sent only if this signal changes state.
Variables: server name and port number
PortPowerOnDetect
The CCM appliance detected that a port’s power on/off control signal is in the state
indicating power is on. This trap is sent upon initialization if the condition is detected.
Subsequent traps are sent only if this signal changes state.
Variables: server name and port number
RebootStarted
The CCM appliance is rebooting.
Variable: initiating username
SerialSessionStarted
A serial session has started.
Variables: username, server name and port number
SerialSessionStopped
A serial session has stopped.
Variables: username, server name and port number
SerialSession
Terminated Another user has terminated a serial session.
Variables: initiating username, terminated username, server name and port number
Table C.1: CCM Appliance Enterprise Traps (Continued)
Trap Description and Variable(s)