Avocent CCM - Manual (Page 101)

Chapter 5: CCM Appliance Commands 87
User Add command
The User Add command adds a new user to the CCM user database. The user database holds a
maximum of 64 user definitions. For more information, see Managing User Accounts on page 27
and Access rights and levels on page 28.
Access right: USER
Access level: ADMIN or APPLIANCEADMIN
Syntax
USER ADD <username> [PASSWORD=<pwd>] [SSHKEY=<keyfile>] [FTPIP=<ftpadd>]
[KEY=<sshkey>] [ACCESS=<access>] [GROUP=<group1>[,<group2>...]]
User Unlock Unlocks a locked-out user.
Table 5.41: User Command Summary (Continued)
Command Description
Table 5.42: User Add Command
Parameter Description
<username>
3-16 alphanumeric character username. Usernames are case sensitive. A username
cannot be All.
PASSWORD=<pwd> 3-16 alphanumeric character password. Passwords are case sensitive.
SSHKEY=<keyfile>
Name of uuencoded public key file on an FTP server. The maximum file size that
may be received is 4K bytes. If this parameter is specified, you must also specify the
FTPIP parameter.
FTPIP=<ftpadd>
FTP server’s IP address. If this parameter is specified, you must also specify the
SSHKEY parameter.
KEY=<sshkey> Uuencoded SSH key.
ACCESS=<access>
Command and port access rights or level. You may specify multiple access rights,
separated by commas, or a level. Valid values for access rights are:
P<n>
Access to the specified port number.
P<x-y> Access to the specified range of ports.
PALL Access to all ports.
USER User configuration access rights.
PCON Port configuration access rights.
SCON Configuration access rights.
SMON Monitor access rights.
BREAK Can issue Port Break command.
Valid values for access levels are:
ADMIN
PALL, USER, SMON, PCON and BREAK access rights.
APPLIANCEADMIN PALL, USER, SCON, SMON, PCON and BREAK
access rights.
Default = PALL,SMON