Avocent CCM - Manual (Page 105)

Chapter 5: CCM Appliance Commands 91
The following command adds the groups Dev3 and Dev4 for JohnD. He may now access the ports
defined in groups Dev3 and Dev4 as well as ports in other groups that were previously configured
for him.
> user set JohnD group=+Dev3,Dev4
User Unlock command
The User Unlock command unlocks a user who was previously locked-out. After this command
completes, the user will be able to attempt login authentication again.
Access right: USER
Access level: ADMIN (may unlock all except APPLIANCEADMIN) or APPLIANCEADMIN
Syntax
USER UNLOCK <username>
Table 5.46: User Logout Command Parameter
Parameter Description
Username to be unlocked.