Ferguson Ariva TT HD PVR - Manual (Page 8)

8
Item Description
1. DISH IN A Input Tuner 1 for digital signal from satellite reception equipment.
Conncet this with the output from your outlet or satellit dish.
DISH IN B Input Tuner 2 for digital signal from satellite reception equipment.
Conncet this with the output from your outlet or satellite dish.
For the full functionality of this receiver, you need to ha ve 2 cable
from your satellite reception equipment.
If this is not possible, you need to connect with the cable bridge
LOOP OUT A with DISH IN B.
LOOP OUT A
When you have only one cable from your satellite reception
equipment,you need to connect with the cable bridge LOOP OUT A
with DISH IN B.
LOOP OUT B: Here you can connect other devices like one analogue receiver.
Attention, only one receiver has to be active . If not the receivers
disturb each other.
2. USB USB connector variant B for connecting with PC.
3. USB
Back side USB connectors for external USB hard disks.
4. LAN Connects to a PC for transferring files and SW download
5. HDMI Connect HDMI input of TV or PC monitor.
6. CVBS OUT Using standard video cables, these jacks connect CVBS(Yellow).
Stereo Audio OUT Using standard stereo audio cables, these jacks connect L/R(White,
Red).
YPbPr OUT Using standard A/V cables, these jacks connect Y/Pb/Pr(Green,
Blue, Red) HD component video input.
7. RS-232C Connects to a Set-top box or a PC serial port.
8. S/PDIF Output for connection to a digital amplifier.
9. Electric Inlet Lead 90~240V AC(Auto-selectable), 50~60Hz. Make sure to check the
power specification.
10. Power Cord AC Power Switch.
1 2 3
4
5 6 7 8 9 10