Ferguson Ariva TT HD PVR User Manual

Page 69

SETUP THE REMOTE CONTROL TO WORK WITH YOU TV

SET-UP the brand code on the remote control

You can set-up the remote to control your TV what you want to control, please find

out the manufacturer of you TV in the BRAND CODE LIST section and note the

three-digit code. The setup procedure as the following step:

1. Turn your TV on.

2. Press and hold the [SETUP] and TV key, keep about a bout 3 seconds at the

same until the LED indicator lights up.

3. Follow the sequence to key in the 3-digis code numbers which you found from

the Brand Code List, the LED indicator will be flash once when you press the

number key every time.

4. After key in the 3-digits code number, if the code number is correct, the LED

indicator will be turn off what was the remote control save the code and exit the

set-up mode. If the code number is not in the list, the LED indicator will flash

twice then keep on light, so please go back to the step 3 and set up again.

5. Please control your TV with the [POWER] key on the remote control, check your

TV power off or not, please go to the

step 6

for power off or repeat the step 3 for

not.

6. Setup is finished.

Remark:

a) Anytime you want to leave the code setup mode, please press any keys except

the number keypad, the LED indicator will turn off after flash any times.

b) The remote control will be leaved the Setup mode automatically if you have not

press any key after 30 seconds.

SEARCH the brand code on the remote control

If you can not identify a suitable Brand Code for your equipment from the Brand

Code List (many lesser known brands codes may be present but not listed under

that brand), you may try our database search method. During the Search the

selected LED indicator will flash at various speeds. The entire search procedure may