elektraLite MY 150 - Manual (Page 21)

20
CLEANING AND MAINTENANCE
1. All bolts and safety chains must be tightly screwed into position and have no corrosion.
2. Regularly check all mechanic moving parts for wear. They must rotate freely and in no way stick or
squeak.
3. Regularly look for wear and tear on the 120 volt input cable and the DMX signal cable.
4. Clean
MY 150 at frequent intervals. Use a moist lint free cloth. Do not use a wet cloth or a cloth with
alcohol or solvents added. Clean lens and the reflector when the lamp is off, disconnected from the
120 supply and when it is cool.
TECHNICAL SPECIFICATIONS
Power supply : 120VAC, 60 Hz.
Power consumption : max. 300w
Lamp : HTI 150 GY9.5 socket, Metal Halide
Motors : 6 micro motors
Packing dimensions : 58x39x44cm (23”x 15.5”x 11.5”)
Net weight :13.5 Kilos (30 pounds)
Gross weight:16 Kilos (35.2 pounds)
[Errors and omissions for all information given in this manual is excepted.
All information is subject to change without prior notice].
Registering your MY150
It is very important that you register your MY 150 so that you can receive any updates and have your warranty
in operation. To register please fill in the warranty form which can be found at
www.myelektralite.com
[Manual Updates. V1.12 = V1.1 + explanation of M10 bolts & insert on 3 to 5 pin DMX XLRs. Pan degrees adjusted. Fonts
changed].