elektraLite MY 150 - Manual (Page 12)

11
1. Select
"AUTO" or "SOUN" by pressing [UP].
2. Press [ENTER] for selecting the desired extension menu.
3. Select "ALON" or "MAST" by pressing [UP].
4. Press [ENTER] to confirm.
5. Press [EXIT/DN] to return to the main menu.
- Display the DMX-value, Reverse display, Shut off LED display
- Display the DMX 512 value of each channel
This function displays the DMX 512 value of each channel.
1. Select "VALU" by pressing [UP].
2. Press [ENTER] to confirm; the display shows“D-00”. In this setting, the DMX-adjustment of every
channel will be displayed.
3. Press [UP] in order to select the desired channel. If you select “D-14” the display will only show the
DMX-value of the 14 th channel.
4. Press [ENTER] to confirm.
5. The display shows "D-
XX“, ”X” stands for the DMX-value of the selected channel.
6. Press [ENTER] or [EXIT/DN] to exit.
- Reverse display
This function you can rotate the display by 180°.
1. Select "rDIS" by pressing [UP].
2. Press [ENTER], the display shows “ON” or “OFF”.
3. Press [UP] to select “ON” to enable this function or “OFF” if you don’t; the display will
rotate by 180°.
4. Press [ENTER] or [EXIT/DN] to exit.
- Shut off LED display
This function you can shut off the LED display after 2 minutes.
1. Select "CLDI" by pressing [UP].
2. Press [ENTER], the display shows “ON” or “OFF”.
3. Press [UP] to select “ON” to enable this function or “OFF” if you don’t.
4. Press [ENTER] or [EXIT/DN] to exit.