elektraLite MY 150 - Manual (Page 13)

12
- Main menu 1
1. Press [ENTER] for 3 seconds to enter the main menu (display flashing).
2. Press [UP] to select “LAMP”.
- Lamp on/off
This function switches the lamp on or off via the display panel.
1. Select
"OPEN" by pressing [UP] button.
2. Press [ENTER], the display shows “ON” or “OFF”.
3. Press
[UP] to select “ON” to switch on the lamp or “OFF” if you wish to switch off the
lamp.
4. Press [ENTER] to confirm.
5. Press [EXIT/DN] to return to the main menu.
- Lamp on/off via external controller
This function switches the lamp on or off via an external controller.
1. Select
“ONLI” by pressing [UP] button.
2. Press [ENTER], the display shows “ON” or “OFF”.
3. Press
[UP] to select “ON” to enable this function or “OFF” if you don’t.
4. Press [ENTER] to confirm.
5. Press [EXIT/DN] to return to the main menu.
- Delay lamp on
This function delays the lamp ignition.
1. Select
"DELA" by pressing [UP] button.
2. Press [ENTER] to confirm; the display shows “D-00”. “D-00” will strike the lamp immediately.
3. Press
[UP] to select the desired delay between "00" and "59" minutes. If you select “D-03” the lamp
will strike after 3 minutes.
4. Press [ENTER] to confirm.
5. Press [EXIT/DN] to return to the main menu.