elektraLite MY 150 - Manual (Page 14)

13
- Main menu 2
1. Press [ENTER] for 3 seconds to enter the main menu (display flashing).
2. Press [UP] to select “SET”.
- Pan Reverse
This function reverses the Pan movement.
1. Select
“rPAN” by pressing [UP] button.
2. Press [ENTER], the display shows “ON” or “OFF”.
3. Press
[UP] to select “ON” to enable this function or “OFF” if you don’t.
4. Press [ENTER] or[EXIT/DN] to exit.
- Tilt Reverse
This function reverses the Tilt movement.
1. Select
“rTIL” by pressing [UP] button.
2. Press [ENTER], the display shows “ON” or “OFF”.
3. Press
[UP] to select “ON” to enable this function or “OFF” if you don’t.
5. Press [ENTER] or [EXIT/DN] to exit.
- Switch 16 bit/8 bit (Fine movement control).
This function switches the device from 16 bit to 8 bit resolution.
1. Select
“16BI” by pressing [UP] button.
2. Press [ENTER], the display shows “ON” or “OFF”.
3. Press
[UP] to select “ON” to set 16 bit, or “OFF” to set 8 bit. The channels PAN Fine
and TILT Fine will be disabled.
4. Press [ENTER] or [EXIT/DN] to exit.
- Reset
This function resets the device via the display panel.
1. Select
“rEST” by pressing [UP] button.
2. Press [ENTER], the display shows “ON” or “OFF”.
3. Press
[UP] to select “ON” to enable this function or “OFF” if you don’t.
4. Press [ENTER] or [EXIT/DN] to exit.
- Restore factory settings
This function restores the factory settings of MY 150. All settings will be set back to the default values
(shaded). Any edited scenes will be lost.
1. Select
“LODA” by pressing [UP] button.
2. Press [ENTER], the display shows “ON” or “OFF”.
3. Press
[UP] to select “ON” to enable this function or “OFF” if you don’t.
4. Press [ENTER] to confirm.
5. Press [EXIT/DN] to return to the main menu.