elektraLite MY 150 - Manual (Page 16)

15
3. Press [ENTER] or [EXIT/DN] to exit.
- Lamp running time
This function displays the running time of the lamp.
1. Select
“LATI” by pressing [UP] button.
2. Press [ENTER], the display shows “XXXX”, “X“ stands for the number of hours.
3. Press [ENTER] or [EXIT/DN] to exit.
- Clear fixture time
This function clears the running time of the device.
1. Select
“CLMT” by pressing [UP] button.
2. Press [ENTER], the display shows “ON” or “OFF”.
3. Press
[UP] to select “ON” to enable this function or “OFF” if you don’t.
4. Press [ENTER] to confirm.
5. Press [EXIT/DN] to return to the main menu.
- Clear lamp time
This function clears the running time of the lamp.
Please clear the lamp time every time you replace the lamp.
1. Select
“CLLT” by pressing [UP] button.
2. Press [ENTER], the display shows “ON” or “OFF”.
3. Press
[UP] to select “ON” to enable this function or “OFF” if you don’t.
4. Press [ENTER] to confirm.
5. Press [EXIT/DN] to return to the main menu.
- Main menu 5
1. Press
[ENTER] for 3 seconds to enter the main menu
(display flashing).
2. Press [UP] to select “EDIT”.
- Define the number of steps in Run
This function defines the number of steps in the Program
Run.
1. Select
“STEP” by pressing [UP] button.
2. Press [ENTER], the display shows “S-XX”, “X” stands
for the total amount of steps you want to save, so you
can call up to 48 scenes in “RUN”.
For example if the “XX” is 05, it means that “RUN”
will run the first 5 scenes you saved in “EDIT”.
3. Press [ENTER] to save and exit.
- Editing the channels of the individual scenes
This function edits the program to be called up in Run.
a) Editing via the Control Board
1. Select
“SC01” by pressing [UP] button.
2. Press [ENTER], the display shows “SCXX”, “X” stands
for the scene no. to be edited.
3. Change the scene no. by pressing [UP].
4. Press
[ENTER], the display shows “C-X”, “X” stands