elektraLite P100 Manual Part Two - Manual (Page 57)

129
the principle of the solo button. When
the solo button is on the led is on. Solo
on means that as you go through a
series of cues for example, then each
cue is executed by itself. If solo is off
each cue you execute is
piled on top of the previous cue or
cues. The former is the most common
way of playing back the cues.
The latter is for when you want to
execute two or more cues at the same
time. Great care must be taken that, if
features overlap with dmx values, then
the resultant output looks correct. For
example combining two Pan positions
will result in a completely different new
Pan position being created which may
now move the fixtures in completely the
wrong position that you wanted them
to go to!