Set up, Creating fixture groups, Operating a fixture group – elektraLite P100 Manual Part Two User Manual
Page 50
122
SET UP
(continued).
FUNCTION
FIRST BUTTON SEQUENCE
SECOND BUTTON SEQUENCE
NOTES
11.To add Stage Focus to
Use > key to change from
Unless you intend to use Stage Focus
the fixture.
Pan/Tilt invert to Stage Focus
you need not change the default settings
12. To add another fixture
Press F1
Now repeat steps 4 thru 9 until you
have all your fixtures added.
13.To activate a fixture
Press FIXTURE 1 ENTER
This will allow you to work the fixture
Obviously you can type in any fixture
number, provided (of course) it is in the
show and you have added it to the
show's
memory.
CREATING FIXTURE GROUPS
FUNCTION
FIRST BUTTON SEQUENCE
SECOND BUTTON SEQUENCE
NOTES
1. To make a fixture group
Press ADD FIXTURE "?" TO
You can use the "THRU" "AND" &
GROUP
"?"
"ALL" buttons to help you group
the
fixtures
quicker.
2. To view a fixture group
Press Group "?"
You will now see the group of fixtures
displayed. The ?? means that the values
are different for all of the fixtures within
the group. Moving the rotaries will
bring
the
values
"together".
3. To make a second fixture
Press ADD FIXTURE 2 THRU 10
This simply demonstrates how to
group
AND FIXTURE 20 TO GROUP 2
combine these fixtures into the same
group.
4. To make a fixture group
This is done no differently than creating
with different types of
a group as described in 1 and 3. The
fixtures.
common channels (or the most common
fixture to be entered in the group) will
be displayed first. The most least
common channels will be displayed last.
Operating a Fixture Group