Nikon P6000 - Manual (Page 183)

169
Basic Camera Setup: The Setup Menu
S
h
ooti
n
g
, Pl
ay
back
and S
e
tup M
e
nus
i Sound Settings
Adjust the following sound settings.
k Auto Off
If no operations are performed for the selected length of time, the monitor will turn
off and the camera will enter standby mode (
A17) to reduce the drain on the
battery. The power-on lamp will blink in standby mode. If no operations are
performed for about another three minutes, the camera will turn off automatically.
Press the shutter-release button halfway or the
c button to exit standby mode.
Choose the time allowed to elapse before the camera enters standby mode. The
time options are 30 s, 1 min (default setting), 5 min, and 30 min.
B
Notes on Auto Off
The time taken for the monitor to enter standby mode is as follows.
• Menus are displayed: three minutes
• Mode dial is set to
G: three minutes
• Mode dial is set to H: three minutes
• Using voice recording: 30 seconds
• Slideshow playback: maximum of 30 minutes
• AC adapter is connected: 30 minutes
Button sound
Turn button sound On (default setting) or Off. A beep will sound once when
operations are completed successfully, twice when the camera acquires focus on
the subject, and three times when an error is detected. Start-up sound will also play
when the camera is turned on.
Shutter sound
Choose shutter sound from On (default setting) or Off.