Nikon D70S - Manual (Page 210)

200
Technical Notes—T
roubleshooting
A Note on Electronically- Controlled Cam er as
In extremely rare in stanc es, un usu al char ac ters may ap pear in the control panel and the
cam era may stop func tion ing. In most cas es, this phe nom e non is caused by a strong
ex ter nal stat ic charge. Turn the cam era off, re move and replace the battery, and turn
the cam era on again, or, if you are using an AC adapt er (available sep a rate ly), dis-
con nect and re con nect the adapt er and turn the cam era
on again. If the problem persists, press the reset switch
(see right) and then reset the camera clock to the correct
date and time (
16). In the event of con tin ued mal-
func tion, con tact your re tail er or Nikon rep re sen ta tive.
Note that dis con nect ing the power source as de scribed
above may result in loss of any data not re cord ed to the
memory card at the time the prob lem occurred. Data
already recorded to the card will not be affected.
Indicator
Control
panel Solution Problem Monitor
20
126
• Memory card contains no
images.
• Current folder is empty.
FOLDER
CONTAINS
NO IMAGES
• Insert another card.
• Set Playback fl dr to All.
126,
129
All photos in current folder
are hidden. ALL IMAGES
HIDDEN
Set Playback fl dr to All or
use Hide im
age to reveal
hidden photos.
21,
124
File has been created or
modifi ed using a com put er
or different make of cam-
era, or fi le is corrupt. FILE DOES
NOT
CONTAIN
IMAGE DATA
Delete fi le or reformat
memory card.
192
2,
20
20,
24
21
• Error accessing memory
card.
• Unable to create new
folder
• Card has not been for-
matted for use in D70S.
THIS CARD
CANNOT BE
USED
(blinks)
• Use Nikon-approved card.
• Check that contacts are
clean. If card is dam aged,
contact retailer or Nikon
rep re sen ta tive.
• Delete fi les or insert new
memory card.
• Format memory card.
Reset switch