Nikon D90 - Manual (Page 90)

70
h
Using the Built-in Flash
The camera supports a variety of flash modes for photographing poorly lit or backlit
subjects.
❚❚Using the Built-in Flash: i, k, n, and o Modes
1
Choose a shooting mode.
Rotate the mode dial to select the desired mode.
2
Choose a flash mode.
Press the M button and rotate until the desired flash mode is displayed in the
control panel (pg. 71).
3
Take pictures.
The flash will pop up as required when the
shutter-release button is pressed halfway, and
fire when a photograph is taken.
❚❚Using the Built-in Flash: P, S, A, and M Modes
1
Choose a shooting mode.
Rotate the mode dial to select the desired mode.
2
Raise the flash.
Press the M button to raise the flash.
3
Choose a flash mode.
Press the M button and rotate until the desired flash mode is displayed in the
control panel (pg. 71).
4
Select a metering method and set exposure.
5
Take pictures.
The flash will fire whenever a picture is taken.
M button