Nikon D90 - Manual (Page 43)

23
X
4
Remove the battery when charging is complete.
Charging is complete when the CHARGE lamp stops
blinking. Remove the battery and unplug the charger.
Insert the Battery
1
Turn the camera off.
Always turn the camera off before inserting or
removing batteries.
2
Open the battery-chamber cover.
Open the battery-chamber cover on the bottom of the
camera.
3
Insert the battery.
Insert the battery as shown at right.
4
Close the battery-chamber cover.
❚❚Removing the Battery
Before removing the battery, turn the camera off. To prevent short-circuits, replace
the terminal cover when the battery is not in use.
Power switch