Nikon D90 - Manual (Page 37)

17
X
Attaching the AN-DC1 Camera Strap
Attach the strap as shown below.
The BM-10 Monitor Cover
A clear plastic cover is provided with the camera to keep the
monitor clean and protect it when the camera is not in use. To
attach the cover, insert the projection on the top of the cover
into the matching indentation above the camera monitor (q)
and press the bottom of the cover until it clicks into place (w).
To remove the cover, hold the camera firmly and pull the
bottom of the cover gently outwards as shown at right.
The DK-21 Viewfinder Eyepiece Cup
Before attaching the DK-5 viewfinder eyepiece cap and other
viewfinder accessories (pg. 239), remove the viewfinder
eyepiece cup by placing your fingers underneath the flanges at
either side and sliding it off as shown at right.