Spektrum SPM3200 DX3R PRO - Manual (Page 25)

24 SPEKTRUM DX3R PRO USER GUIDE
EN
COMPLIANCE INFORMATION FOR
THE EUROPEAN UNION
The following information is for item numbers: SPM3200E
The following information is for item numbers: SPM3200FR
Declaration of Conformity
(in accordance with ISO/IEC 17050-1)
No. HH2010080201
Product(s): Spektrum DX3R PRO Transmitter
Item Number(s): SPM3200E, SPM3200FR
Equipment class: 2
The object of declaration described above is in conformity with the
requirements of the specifications listed below, following the provisions
of the European R&TTE directive 1999/5/EC:
EN 60950 Safety
EN 300-328 Technical requirements for Radio equipment
EN 301 489-1,
301 489-17
General EMC requirements for Radio equipment
Signed for and on behalf of:
Horizon Hobby, Inc.
Champaign, IL USA
Aug 02, 2010
Steven A. Hall
Vice President
International Operations and Risk Management
Horizon Hobby, Inc.
Instructions for Disposal of WEEE
by Users in the European Union
This product must not be disposed of with other waste. Instead,
it is the user’s responsibility to dispose of their waste equip-
ment by handing it over to a designated collection point for the recycling
of waste electrical and electronic equipment. The separate collection and
recycling of your waste equipment at the time of disposal will help to
conserve natural resources and ensure that it is recycled in a manner that
protects human health and the environment. For more information about
where you can drop off your waste equipment for recycling, please contact
your local city office, your household waste disposal service or where you
purchased the product.
APPENDIX
sTEErINg TENsION adjusTmENT
Steering tension is adjusted via the recessed
screw located below the steering wheel. Using a small
Phillips screwdriver, turning the screw clockwise
increases steering tension while turning the screw
counterclockwise reduces steering tension.
WARNING: READ AND FOLLOW ALL
INSTRUCTIONS
Do not attempt disassembly, use with incompatible
components, or augment the product in any way,
outside of these instructions. Failure to follow each
instruction and precaution could result in damage to
the product, property and/or personal injury.
Read ALL instructions. If after reading these
instructions you are not confident in your ability to
switch configurations, contact the appropriate Horizon
Product Support office for assistance.
CAUTION: Never turn the radio on when changing
configurations.
ChaNgINg frOm drOPdOwN TO
sTaNdard whEEl
The DX3R PRO comes with the dropdown wheel
installed and can be switched to the standard wheel.
All the parts necessary to convert to the standard wheel
are included. The included 3/32-inch hex wrench and a
small Phillips screwdriver will be needed.
AT BG CZ CY DE
DK ES FI GR HU
IE IT LT LU LV
MT NL PL PT RO
SE SI SK UK
AT BG CZ CY DE
DK ES FI FR GR
HU IE IT LT LU
LV MT NL PL PT
RO SE SI SK UK