Blodgett SC-GH SERIES - Manual (Page 21)

21
7.0 TROUBLESHOOTING (Continued)
Water accumulates in the compartment:
1. Compartment drain clogged.
Water flows into drain during shut down:
1. Condensate valve does not close. Check thermostatic cooling valve body for foreign
particles or damage.
Water not being supplied to steam generator:
1. Water supply is “OFF”.
2. Supply water pressure too low.
3. Defective water fill solenoid valve.
4. Probes shorted or not sensing water, thereby not operating fill solenoid valve.
5. Check that drain solenoid is closed.