Switch default settings, Switch default settings -8 – Allied Telesis AT-3714FXL User Manual
Page 26
Installing the Switch
2-8
Switch Default Settings
Table 2-2 lists the switch default settings.
Table 2-2 Switch Default Settings
Settings
Default
IP Address
0.0.0.0
Subnet Mask
0.0.0.0
Gateway Address
0.0.0.0
Get community string
public
Set community string
private
Trap community string
public
Port mirroring state
Disabled
Spanning Tree Protocol
Disabled
Telnet Access
Enabled
System Name
None
Password (Omega)
No password assigned
Download Password
ATS20
Port Priority
128
Port Path Cost
100
Auto-negotiate/Half-Duplex/Full-Duplex
Auto-negotiate (AT-3726XL, AT-3716XL)
Half-duplex (AT-3714FXL)
Spanning Tree Priority
32768
Active Aging Time
300 seconds
Hello Time
2 seconds
Transmit Pacing
Disabled
Bridge Identifier (STP)
32768 (bridge priority)
Port Priority (STP)
128
Port Cost (STP)
100 for 10 Mbps ports
10 for 100 Mbps ports
Store-and-forward or Cut-through (Fragment-free)
Store-and-forward
Domain Name
None
Timeout
5 min
utes
Default VLAN Name
Default VLAN