Allied Telesis AT-3714FXL - Manual (Page 22)

Installing the Switch
2-4
Installing the Switch on the Desktop
1. Place the switch on a level, secure surface.
2. Apply power to the switch as follows:
Caution
The power cord is used as a disconnect device. To de-energize
equipment, disconnect the power cord.
"
10
Attach the power cord to the unit and plug it in the wall outlet.
Verify that the Power LED lights green. See Table 2-1 on 2-6.
As power is applied to the switch, the Fault LED flashes as the switch
runs through its internal self-testing programs.