Allied Telesis AR400 Series Router - Manual (Page 106)

106 AR400 Series Router User Guide
Software Release 2.5.2
C613-02034-00 REV A
4. Configure router 2 as an OSPF router.
To create an OSPF area, assign the IP interfaces to the area, and configure
OSPF routing parameters, enter the command:
ENABLE OSPF
ADD OSPF AREA=0.0.0.1 AUTHENTICATION=PASSWORD
ADD OSPF RANGE=172.31.0.0 AREA=0.0.0.1 MASK=255.255.0.0
ADD OSPF INTERFACE=ETH0 AREA=0.0.0.1 PASSWORD=csecret
ADD OSPF INTERFACE=PPP0 AREA=0.0.0.1 PASSWORD=bsecret
For more information about configuring OSPF, see the Open Shortest Path First
(OSPF) chapter in the AR400 Series Router Software Reference.