Allied Telesis AT-FS217 - Manual (Page 21)

AT-FS21x and AT-FS212/x Series Installation Guide
11
3. Gently slide the bracket off the switch. See Figure 4.
Figure 4 Sliding the Wall-mounting Bracket off the Switch
Note
For drywall installation, drill two 3/16-inch holes, insert the plastic
anchors and tap flush.
4. Position the wall-mounting bracket on the wall and, using two
Phillips-head screws (provided), secure the bracket to the wall. See Figure
5.
Figure 5 Attaching the Wall-mounting Bracket to the Wall