Allied Telesis AT-FS217 - Manual (Page 13)

AT-FS21x and AT-FS212/x Series Installation Guide
3
Key Features
The switches have the following key features:
❑ LEDs for unit and port status
❑ Wall-mountable chassis
❑ Auto MDI/MDI-X
❑ External AC/DC power adapters (North America, Continental, or
Europe)
❑ Full- or half-duplex mode operation on the twisted pair port
❑ Full-duplex operation on the fiber optic port
❑ FJ, LC, MT-RJ, SC, ST, or VF-45 fiber optic connector
❑ Data packet forwarding and filtering at full wire speed
❑ Store and forward switching mode
❑ Automatic address learning and aging
❑ IEEE 802.3u compliant auto-negotiation on the twisted pair port
Switch Performance
The switches perform at:
❑ 148,800 pps for 100 Mbps and 14,880 pps for 10 Mbps with full wire
speed forwarding and filtering
❑ 200 Mbps maximum throughput in 100 Mbps, full-duplex mode
❑ 20 Mbps maximum throughput in 10 Mbps, full-duplex mode
❑ Storage for up to 4,000 MAC addresses
❑ Unlimited multicast/broadcast addresses
❑ Low latency 15.6
µ
s (64-byte packet, 100 Mbps full-duplex)