Allied Telesis AT-MC16 - Manual (Page 37)

AT-MC1x Series Installation Guide
27
Warning: In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate
measures.
$
1 RFI Emission EN55022 Class B
$
2 Immunity EN55024
$
3 Warning (AT-MC13, AT-MC14, AT-MC16) : This product requires shielded cables
to comply with emission and immunity standards. If it is used with
unshielded cables, the user may be required to take measures to correct the
interference problem at their own expense.
$
4 Electrical Safety TUV-EN60950, UL1950, CSA 950
SAFETY
$
5 Power to the hub must be sourced only from the adapter.
EUROPE—EC (AT-MC13, AT-MC14, AT-MC16)
Use TÜV licensed AC adapter of 12 V DC, min 500 mA.
EUROPE—EC (AT-MC15)
Use TÜV licensed AC adapter of 12 V DC, min 300 mA.
OTHER COUNTRIES (AT-MC13, AT-MC14, AT-MC16)
Use a Safety Agency Approved AC adapter of 12 V DC, min 500 mA.
OTHER COUNTRIES (AT-MC15)
Use a Safety Agency Approved AC adapter of 12 V DC, min 300 mA.
$
6 Laser EN60825
$
7 This is a “CLASS 1 LED PRODUCT” (AT-MC13, AT-MC14)
$
8 Warning (AT-MC16) : Class 1 Laser product.
$
9 Warning: Do not stare into the Laser beam.
At time of installation the Fiber Optic Lasers comply with FDA Radiation
Performance Standard 21CFR Subchapter J, applicable at date of
manufacture.
Caution: Power cord is used as a disconnection device. To de-energise
equipment disconnect the power cord.
$
10 LIGHTNING DANGER
Danger : Do not work on equipment or cables during periods of lightning
activity.
$
11 Do not block air vents.