Where to go from here, In case of problems, Where to go from here in case of problems – Allied Telesis AT-8203 User Manual
Page 21
AT-8202 and AT-8203 Installation Guide
15
Where to Go From Here
To configure, operate, and monitor the switch, download the following guides
from Allied Telesyn’s website at www.alliedtelesyn.com/manuals.htm:
❑
Software Release Notes for information on your version of switch
firmware
❑
AT-8202 ATM Uplink User’s Guide for ATM-specific commands
❑
AT-8203 FDDI Uplink User’s Guide for FDDI-specific commands
❑
FORMULA 8200 User’s Guide for Ethernet commands
In Case of Problems
The uplink cards provide transparent operation once they have been installed
and configured. If you suspect that the card you have installed is
malfunctioning or is causing system problems, refer to the LEDs for the card’s
operational status. Refer also to the switch’s system and port LEDs to further
isolate the problem.
If you are unable to resolve the problem, contact Allied Telesyn’s Technical
Support. See Appendix D, “Where To Find Us” on page 23, for contact
information.