Allied Telesis AT-8203 - Manual (Page 16)

Replacing the Chassis Top Cover
10
Replacing the Chassis Top Cover
1. Slip the back of the cover over the back chassis rails, as shown in
Figure 10.
Figure 10: Chassis Top Cover Replacement
2. Lower the cover onto the chassis, being careful to align the latches
along the chassis sides with the latch cutouts on the cover.
3. Once the cover is in position, gently push it forward toward the front
bezel until it latches into position.
4. Secure the cover by inserting and tightening the original screw you
removed from the back when you took the cover off in Step 5 on page 6.
5. Reattach rackmount brackets if applicable, and return the unit to the
rack, bench, or table.
AC-4003