Allied Telesis AT-MR815T - Manual (Page 19)

9
Site Requirements
Ventilation
AT-MR415T/AT-MR815T Micro Repeaters have openings on both sides for
ventilation. Although these Micro Repeaters do not require an internal fan to
aid in cooling, adequate ventilation is required. Ensure that the ventilation
openings located on the sides of the chassis are never blocked.
Note
Maximum ambient temperature is 104
o
F (40
o
C).
Power
Be sure that the voltage and frequency to the AC adapter is compatible with
the country of use and, therefore, the power provided. Since there is no
external power switch, power is applied when the power cord from the AC
adapter is connected to the DC receptacle of your repeater.
Note
Power to the hub must be sourced only from adapter in the package or
direct plug in type approved adapter rated 7.5Vdc, 500mA.
Chapter 2
Installation