Allied Telesis AT-MR815T - Manual (Page 17)

AT-MR415T and AT-MR815T Installation Guide
7
❑ MDI MDI-X Toggle Switch
— This switch allows you to set the cascade port (the port directly to
the right of this switch). The cascade port, in turn, can be used to
either connect to another repeater or as a normal 10Base-T port.
The switch positions are as follows:
MDI (left position). This port can now be used to
cascade to another repeater
MDI-X (right position). Use this port as a normal
10Base-T port
❑ 10Base-T Connector
— There is one 10Base-T connector for each port on the unit. Connect
10Base-T cables (twisted pair cable, UTP) into the desired RJ-45
ports.
❑ Power Jack
— This connector is used to provide power to the unit using the direct
plug in type approved adapter rated 7.5Vdc, 500mA.