Allied Telesis AT-VIEW PLUS 2.3 DEVICE MANAGEMENT User Manual
Page 94
Allied Telesyn
AT-VIEW PLUS
DEVICE MANAGEMENT
PN 613-50507-00 Rev C
Page 94 of 224
Note
- The current firmware version does not allow the Initial MRU parameter to be
configured. Attempting to configure this parameter will not result in an error but the new
value will not be applied.
Note
- The current firmware version does not allow the following parameters to be
configured:
o
Receive ACC Map
o
Transmit ACC Map
o
Magic Number
o
FCS Size
Attempting to configure these parameters will result in the error message: "The error
occurred with 'Set' operation. Error: bad value."
PPP Link Quality Report
LQR Info
Displays Link Quality Report information for a particular PPP link.
Note
- The LQR Info sub-menu option does not display the correct parameters.
Instead, it displays the sub-menu option name as a parameter with a value of
'noSuchName'.
LQR Configuration
Displays Link Quality Report configuration information for a particular PPP link.
Note
- The LQR Configuration sub-menu option does not display the correct
parameters. Instead, it displays the sub-menu option name as a parameter with a value
of 'noSuchName'.
LQR Extensions
Displays information on the most recently received Link Quality Report packet for a
particular PPP link.
Note
- The LQR Extensions sub-menu option does not display the correct parameters.
Instead, it displays the sub-menu option name as a parameter with a value of
'noSuchName'.
PPP Tests
Performs a PPP echo test or PPP discard test.
Note
- The PPP Tests sub-menu option does not display the correct parameters. Instead, it
displays the sub-menu option name as a parameter with a value of 'noSuchName'.