Allied Telesis AT-VIEW PLUS 3.1 AMIGO - Manual (Page 9)

Allied Telesyn AT-VIEW PLUS
AMIGO
2.1.2 Target Host
The target host can be specified as a dotted IP address or as a host name.
Example:
Amigo -TargetHost 172.16.18.34 Amigo -TargetHost dvcmgrhub
2.1.3 SNMP Version
The Device Manager can use SNMPv1, SNMPv2c and SNMPv3. You may
specify a value of 1, 2 or 3. If the SNMP Version is not specified, the default
value of 1 (SNMPv1) will be used.
Examples:
Amigo -TargetHost 172.16.99.123 -SnmpVersion 1
Amigo -TargetHost 172.16.99.123 -SnmpVersion 2
2.1.4 Get Community
Get Community is an SNMP community string used to get MIB values from the
agent. You must specify the same community string as the one configured on the
target host. If the string is not specified, the default community string "public" is
used.
Example:
Amigo -TargetHost 172.16.18.34 -GetCommunity dvcmgrget
2.1.5 Set Community
Set Community is an SNMP community string used to change the values of the
agents' MIB variables. You must specify the same community string as the one
configured on the target host. If the string is not specified, the default community
string "private" is used.
PN 613-50662-00 Rev B Page 9 of 48