Allied Telesis AT-VIEW PLUS 3.1 AMIGO - Manual (Page 11)

Allied Telesyn AT-VIEW PLUS
AMIGO
configured for the User Account Name on the target host. The available
Authentication Protocols are MD5 and SHA.
Examples:
Amigo -TargetHost 172.16.99.123 -SnmpVersion 3 -UserName ATVP
-SecLevel authNoPriv -AuthProtocol MD5 -AuthPassword
PASS1234
Amigo -TargetHost 172.16.99.123 -SnmpVersion 3 -UserName ATVP1
-SecLevel authNoPriv -AuthProtocol SHA -AuthPassword
PASS1233
2.1.9 Authentication Password
If you specified 3 (SNMPv3) for the SNMP Version, and your Security Level is
authNoPriv or authPriv, then you must specify an Authentication Password that is
configured for the User Account Name on the target host.
Examples:
Amigo -TargetHost 172.16.99.123 -SnmpVersion 3 -UserName ATVP
-SecLevel authNoPriv -AuthProtocol MD5 -AuthPassword
PASS1234
Amigo -TargetHost 172.16.99.123 -SnmpVersion 3 -UserName ATVP1
-SecLevel authNoPriv -AuthProtocol SHA -AuthPassword
PASS1233
2.1.10 Privacy Protocol
If you specified 3 (SNMPv3) for the SNMP Version, and your Security Level is
authPriv, then you must specify a Privacy Protocol that is configured for the User
Account Name on the target host. The available Privacy Protocol is DES.
Examples:
Amigo -TargetHost 172.16.99.123 -SnmpVersion 3 -UserName ATVP
-SecLevel authPriv -AuthProtocol MD5 -AuthPassword PASS1234
-PrivProtocol DES -PrivPassword PASS5678
PN 613-50662-00 Rev B Page 11 of 48