Allied Telesis AT-VIEW PLUS 3.1 AMIGO - Manual (Page 32)

Allied Telesyn AT-VIEW PLUS
AMIGO
4.1.6.3.2 SNMP v3 Settings
User Account Name
This is the SNMPv3 User Account to be used for accessing the MIB of the
target device. Make sure to specify a User Account that has already been
configured on the target device.
Security Level
This is the Security Level for the User Account Name that you have
specified. Make sure to set the Security Level to be the same as what is
configured on the target device.
These are the available Security Levels:
No Auth / No Priv
This Security Level uses no authentication and no privacy.
Auth / No Priv
This Security Level uses authentication without privacy.
Auth / Priv
This Security Level uses authentication and privacy.
Authentication Protocol
If the Security Level is "Auth / No Priv" or " Auth / Priv", you need to
specify an Authentication Protocol. Make sure to set the Authentication
Protocol to be the same as what is configured on the target device.
These are the available Authentication Protocols:
MD5
Use HMAC-MD5-96 protocol
SHA
Use HMAC-SHA-96 protocol
Authentication Password
If the Security Level is "Auth / No Priv" or " Auth / Priv", you need to
specify an Authentication Password. Make sure to set the Authentication
Password to be the same as what is configured on the target device.
PN 613-50662-00 Rev B Page 32 of 48