Allied Telesis AT-VIEW PLUS 3.1 AMIGO - Manual (Page 29)

Allied Telesyn AT-VIEW PLUS
AMIGO
Select MIB-Files tab
4.1.6.2 Setting Target Devices Tab
In the "Setting target devices" tab, you can add or remove a target device to/from
which MIB values are set or retrieved. You can also configure the SNMP
connection properties of a target device.
To add a target device, input a dotted IP address or a host name in the Host name
textbox, then click Add.
To change the properties of a specific target device, select the target device from
the list, then click the Property button. The "Target host property" dialog box
opens. Change the properties, then click OK.
To remove a target device from the list, select a device in the list then click
Delete.
PN 613-50662-00 Rev B Page 29 of 48