Allied Telesis AT-VIEW PLUS 3.1 AMIGO - Manual (Page 10)

Allied Telesyn AT-VIEW PLUS
AMIGO
Example:
Amigo -TargetHost 172.16.18.34 -SetCommunity dvcmgrset
2.1.6 User Account Name
If you specified 3 (SNMPv3) for the SNMP Version, you must also specify a User
Account Name that is already configured on the target host.
Examples:
Amigo -TargetHost 172.16.99.123 -SnmpVersion 3 -UserName ATVP
-SecLevel noAuthNoPriv
Amigo -TargetHost 172.16.99.123 -SnmpVersion 3 -UserName ATVP1
-SecLevel authNoPriv -AuthProtocol SHA -AuthPassword
PASS1233
2.1.7 Security Level
If you specified 3 (SNMPv3) for the SNMP Version, you must also specify a
Security Level that is configured for the User Account Name on the target host.
The available Security Levels are noAuthNoPriv, authNoPriv, and authPriv.
Examples:
Amigo -TargetHost 172.16.99.123 -SnmpVersion 3 -UserName ATVP
-SecLevel noAuthNoPriv
Amigo -TargetHost 172.16.99.123 -SnmpVersion 3 -UserName ATVP1
-SecLevel authNoPriv -AuthProtocol SHA -AuthPassword
PASS1233
2.1.8 Authentication Protocol
If you specified 3 (SNMPv3) for the SNMP Version, and your Security Level is
authNoPriv or authPriv, then you must specify an Authentication Protocol that is
PN 613-50662-00 Rev B Page 10 of 48