beautypg.com

1 snmp v1 / v2c settings – Allied Telesis AT-VIEW PLUS 3.1 AMIGO User Manual

Page 31

background image

Allied Telesyn

AT-VIEW PLUS

AMIGO


SNMP version

The version of SNMP that the device will use to send and receive device
information. After choosing the version of SNMP to use, click on the
Settings button to specify the SNMP parameters that correspond with the
chosen version. If the SNMP version is set to "v1" or "v2c", then the
SNMP v1/v2c Settings dialog box will be displayed. Otherwise, if the
SNMP version is set to "v3", then the SNMP v3 Settings dialog box will
be displayed.

Target Host Property dialog box

4.1.6.3.1 SNMP v1 / v2c Settings

Community for read/Community for write

The community strings used to perform SNMP operations on the device.

SNMP v1/v2c Settings dialog box

PN 613-50662-00 Rev B

Page 31 of 48

See also other documents in the category Allied Telesis Computer hardware: