Allied Telesis AT-VIEW PLUS 3.1 AMIGO - Manual (Page 24)

Allied Telesyn AT-VIEW PLUS
AMIGO
To change the value, check the variables to be changed before clicking the Set
MIB Value button. AMIGO will send the checked values in a batch.
3.3.2 MIB Variable Column
The second column shows the name of the variable.
3.3.3 MIB Value Column
The third column shows the value of the variable. If the variable has write-access,
you can input the value to be set in this column. If the variable takes a value from
a fixed set of values, this column is a drop-down listbox. To change the variable
value, input or select the value to set/change, check the boxes for the variables to
change, then click the Set MIB Value button.
Data displayed in the MIB Value column is not automatically updated. To see the
latest value, click the Get MIB Value button again.
Note - To put into effect values entered in the MIB Value column, press the Enter
key or move the cursor to another column.
Note - SNMPv3: Depending on the READ VIEW access settings of the User
Account Name used, there is a possibility that Amigo may not be able to access
some MIB values. When this happens, the values for the affected MIB variables
will be blank.
3.3.4 Select All Button
: checks all variables.
3.3.5 Clear Button
: unchecks all variables.
3.3.6 Reverse Button
: flips the states of all checkboxes, that is, unchecks all variables currently
selected and checks all variables currently not selected.
3.3.7 Get MIB Value Button
: gets the value of the variable selected in the MIB Variable column.
PN 613-50662-00 Rev B Page 24 of 48