Allied Telesis AT-ARW256E - Manual (Page 4)

AT-ARW256E Quick Installation Guide
Back Panel
4 7
1 2 3 5 6
1
DSL
Telephone jack (RJ-11) to connect to your Telephone Wall Socket (DSL line).
2
USB
USB jack to connect to your PC’s USB slot.
3
RESET
To reset your Wireless ADSL Router to factory default settings. (All customised settings
that you have saved will be lost!). Please refer to the below footer2 on how to activate the
reset function.
4
ETHERNET (E1-E4)
10/100 Base-T Auto-MDI/MDIX Ethernet jack (RJ-45) to connect to your PC’s Ethernet
Network card or Ethernet Hub / Switch.
5
DC IN (9V)
To connect to the Power Adapter that comes with your package.
6
POWER SWITCH
To power on or off the modem.
I - indicates ON position
O - indicates OFF position.
7 RF Antenna
180
° 2.4Ghz Wireless Antenna.
2 To activate the reset function:
- Ensure that your Wireless ADSL Router is powered on.
- Use a paper clip or a pencil tip to depress the reset button, hold for at least 5secs
and release. At this point, the Wireless indicator and DSL indicator will go off, the
reset is in progress.
- When the Wireless indicator starts blinking, it means that the reset process is
completed. The default settings are now restored.
- DSL line is synchronized once the DSL indicator colour is steady green.
Page 4 of 32