Allied Telesis AT-ARW256E - Manual (Page 2)

AT-ARW256E Quick Installation Guide
Introduction
Thank you on your purchase of the 4-Port Combo Ethernet USB Wireless ADSL Router! The
Wireless ADSL Router allows you to share high-speed broadband connection with multiple
PC using a single device wired or wireless.
The 4-Port Combo Ethernet USB Wireless ADSL Router can be connected to any
computer/notebook with a 10/100 Base-T Ethernet card or USB port for wired connection or
an IEEE 802.11b/g Wireless adapter. The Ethernet ports have Auto MDI/MDIX feature which
can allows both cross or straight UTP cable to be utilized. The 4-Port Combo Ethernet USB
Wireless ADSL Router has an in-built IEEE802.11g Wireless LAN Access Point for wireless
connectivity.
This documentation assumes that you have already installed an Ethernet card or a wireless
adapter on your computer/notebook
Minimum System Requirements
• Pentium® MMX 233MHz
• Ethernet card installed with TCP/IP Protocol (Required only if you are connecting to
the ETHERNET port of your DSL Router)
• Single USB port
• IEEE 802.11b Wireless adapter (Required if you are connecting to the Wireless
Access Point of the router)
• OS independent for Ethernet
• Microsoft Windows 98SE/ME/2000/XP for USB
• Web Browser support:
Microsoft Internet Explorer 4.0 (or later versions)
Netscape® Navigator 3.02 (or later versions)
Wireless ADSL Router Package
For any missing items, please contact your dealer immediately.
Page 2 of 32