Allied Telesis AT-S63 - Manual (Page 700)

Chapter 41: Management ACL Commands
700 Section IX: Management Security
ADD MGMTACL
Syntax
add mgmtacl id= value application=telnet|web|ping|all
Parameters
id Specifies the identification number of the access control
entry to be modified. The range is 1 to 256. To view the
ID numbers of the existing ACEs, refer to “SHOW
MGMTACL” on page 708.
application Specifies the permitted applications of the ACE. The
options are:
telnet Permits Telnet management.
web Permits web browser management.
ping Permits the management workstation to ping
the switch.
all Permits all of the above.
You can specify more than one option by separating
them with a comma (for example, “Web,Ping”). The new
application is added to the existing application of the
ACE.
Description
This command modifies the permitted application of an ACE. The new
application is added to any application already assigned to the ACE. If you
want to assign a new application while overriding the existing one, refer to
“SET MGMTACL” on page 707.
Examples
The following command adds web browser as a permitted application to
ACE ID 12:
add mgmtacl id=12 application=web
The following command adds pinging as a permitted application to ACE ID
27:
add mgmtacl id=27 application=ping