Allied Telesis AT-S63 - Manual (Page 541)

AT-S63 Management Software Command Line Interface User’s Guide
Section VI: Virtual LANs 541
SHOW VLAN
Syntax
show vlan[= name | vid ]
Parameter
vlan Specifies the name or VID of the VLAN.
Description
This command displays the VLANs on the switch. An example of the
information displayed by this command for a MAC address-based VLAN is
shown in Figure 46.
Figure 46. SHOW VLAN Command for a MAC Address-based VLAN
The information displayed by the command is described here:
ˆ VLAN name - The name of the VLAN.
ˆ VLAN ID - The ID number assigned to the VLAN.
ˆ VLAN Type - The type of VLAN. This will be MAC Based for a MAC
address-based VLAN.
ˆ Protected Ports - The status of protected ports. This will be No for a
MAC address-based VLAN.
ˆ Untagged port(s) - The untagged ports of the VLAN. This will be None
for a MAC address-based VLAN.
ˆ Tagged port(s) - The tagged ports of the VLAN. This will be None for a
MAC address-based VLAN.
VLAN Name ............................ Sales
VLAN ID .............................. 4
VLAN Type ............................ MAC Based
Protected Ports ...................... No
Untagged Port(s) ..................... None
Tagged Port(s) ....................... None
MAC Associations:
Total number of associated MAC addresses: 5
-------------------------------------------------
MAC Address
Ports
-------------------------------------------------
00:06:5B:44:44:44
4-8
00:06:5B:55:55:55 4
00:06:5B:66:66:66 4
00:06:5B:77:77:77 4
00:06:5B:88:88:88 4
-------------------------------------------------