Allied Telesis AT-S63 - Manual (Page 100)

Chapter 6: SNMPv2 and SNMPv2c Commands
100 Section I: Basic Features
DISABLE SNMP COMMUNITY
Sy nt a x
disable snmp community=" community "
Pa r a me t e r
community Specifies an SNMP community string to disable on
the switch. This parameter is case sensitive. The
string must be enclosed in double quotes if it
contains a space or other special character such as
an exclamation point. Otherwise, the quotes are
optional.
De s c r i pt i on
This command disables a community string on the switch, while leaving
SNMP and all other community strings active. IP addresses of
management stations or trap receivers assigned to the community string
are also disabled. A disabled community string cannot be used by a
management station to access the switch.
Exa mpl e
The following command deactivates the SNMP community string
“sw1200” and the IP addresses of any management stations and trap
receivers assigned to the community string:
disable snmp community=sw1200