Allied Telesis AT-S63 - Manual (Page 647)

AT-S63 Management Software Command Line Interface User’s Guide
Section IX: Management Security 647
5. These commands download the CA certificates into the switch’s file
system from the TFTP server. The commands assume that the IP
address of the server is 149.88.88.88 and that the certificate names
are “sw24cer.cer” and “ca.cer”. (This step could be performed using
Xmodem.)
load method=tftp destfile=sw24cer.cer server=149.88.88.88
file=c:sw24cer.cer
load method=tftp destfile=ca.cer server=149.88.88.88
file=c:ca.cer
6. These commands load the certificates into the certificate database:
add pki certificate="Switch 24 certificate"
location=sw24cert.cer
add pki certificate="CA certificate" location=ca.cer
7. This command disables the web server:
disable http server
8. This command configures the web server. It activates HTTPS and
specifies the key created in step 1:
set http server security=enabled sslkeyid=8
9. This command enables the web server:
enable http server