Allied Telesis AT-S63 - Manual (Page 51)

AT-S63 Management Software Command Line Interface User’s Guide
Section I: Basic Operations 51
Note
The switch does not forward network traffic during the reset process.
Some network traffic may be lost.
Note
For a list of default values, refer to Appendix A, “AT-S63 Default
Settings” in the AT-S63 Management Software Menus Interface
User’s Guide.
Your local or remote management session with the switch ends when you
reset the switch. You must reestablish the session to continue managing
the switch.
Examples
The following command configures the switch using the configuration file
named
switch12.cfg :
restart switch config=switch12.cfg
The following command resets the switch to its default values:
restart switch config=none
The following command resets the switch:
restart switch
Equivalent Command
restart reboot
For information, see “RESTART REBOOT” on page 49.