ADT Security Services ADT-UDACT - Manual (Page 37)

Document 50934 Rev B 5/15/00 PN 50934:B 37
Figure 4-2: Handset/Speaker Connection
Both Primary and
Secondary Lines
To perform a Lamp Test, press MODE then 5267 followed by [ENTER/STORE].
This will test all system LEDs. The LEDs will stay on for five seconds, then the
ADT-UDACT will return to normal mode.
☛ 5267 spells LAMP on a Touch-Tone® phone.
4.4 Lamp Test Mode
UDACTNOT.WMF