Wpa/wpa2- psk security, Wpa/wpa2-psk security – Allied Telesis AT-WCC201G User Manual

Page 68

Chapter 3: Microsoft Windows XP

6. Click Key Index and specify the position of the encryption key in the

encryption key table on the wireless router or access point. The range
is 1 to 4.

7. Click OK.

WPA/WPA2-

PSK Security

To configure the Wireless Network Properties window for WPA-PSK or
WPA2-PSK security, do the following:

1. Click the Network Name (SSID) field, enter the SSID of the wireless

network. The network name is case sensitive.

2. Click the Network Authentication parameter and from the pull-down

menu select either WPA-PSK or WPA2-PSK.

Note

Do not select WPA2-PSK unless the wireless router or access point
supports WPA2.

3. Click the Data Encryption parameter and from the pull-down menu

select either TKIP or AES.

4. In the Network Key and Confirm Network Key fields, enter the router

or access point’s passphrase (also referred to as the shared secret).

5. Click OK.