Allied Telesis AT-WCC201G - Manual (Page 47)

AT-WCC201G Wireless Adapter Card Installation Guide
47
DNS server addresses and enter the IP address in the field. You can
enter up to two IP addresses of domain name servers. The alternate
DNS server address is used only if the server specified as the
preferred DNS server does not respond.
10. Click OK to close the LAN Settings window.
11. Click the Option tab.
12. Verify that the option Enable IP Setting and Proxy Setting in Profile
has a check mark. If it does not, click it once to add a check mark. If
you do not activate this option, the IP address for the wireless adapter
must be set using Windows, as explained in “Setting the IP Address”
on page 58.
13. Click the Configuration tab.
14. In the Configuration tab, click Apply.
Note
The actual initial assignment of an IP address to a wireless adapter
using the configuration program can take up to a minute to occur.
15. If you are finished using the configuration utility, click OK.