Allied Telesis AT-WCC201G - Manual (Page 46)

Chapter 2: Using the Adapter’s Configuration Utility
46
The LAN Settings window is shown in Figure 26.
Figure 26. LAN Settings Window
7. If you want the adapter to obtain its IP address, subnet mask, and
default gateway from a DHCP server on your network, click Obtain an
IP address automatically. A check in the dialog box activates the
DHCP client.
8. If you want to manually enter an IP address, do the following:
a. Click Obtain an IP address automatically to remove the check
from the dialog box.
b. In the IP address field, enter an IP address for the adapter.
c. In the Subnet mask field, enter the adapter’s subnet mask.
d. If the wireless node needs to communicate through a router, enter
the IP address of the router in the Default gateway field.
9. If your network has a domain name service, which converts domain
names into IP addresses, and you want the computer to obtain the IP
address of the domain name server from a DHCP or BOOTP server,
select Obtain DNS server address automatically. To enter the IP
address of a domain name server manually, select Use the following