Allied Telesis AT-WCC201G - Manual (Page 63)

AT-WCC201G Wireless Adapter Card Installation Guide
63
Windows displays the SSIDs of the detected wireless networks in the
Wireless Network Connection window. An example of the window is
shown in Figure 37.
Figure 37. Wireless Network Connection Window
3. Double-click on the wireless network to connect to or, alternatively,
click once on the network and click Connect.
If the wireless router or access point is running WEP, WPA, or WPA2,
the Wireless Network Connection window, shown in Figure 38,
prompts you for the WEP encryption key or, in the case of WPA or
WPA2, the passphrase, also referred to as the shared secret. Go to
Step 5 to enter the encryption key or passphrase.
Figure 38. Wireless Network Connection Prompt (WEP or WPA Security)