Allied Telesis AT-WCC201G - Manual (Page 58)

Chapter 3: Microsoft Windows XP
58
Setting the IP Address
To set the IP address of the adapter or to activate the DHCP client,
perform the following procedure:
1. Open the Control Panel.
2. Double-click on Network Connections.
An example of the Network Connections window is shown in Figure
32.
Figure 32. Network Connections Window
3. Right-click on the Wireless Network Connection icon of the wireless
adapter and select Properties from the pull-down menu, as shown in
Figure 33.
Figure 33. Wireless Network Connection Pull-down Menu